Alpine have been extremely quiet when it comes to producing updates for the A525 this season, as the team haven’t announced any new aerodynamic components for the Chinese, Japanese, Bahrain or Saudi Arabian Grand Prix in the car presentation document ahead of those events.

And, whilst they did so in Australia that was simply an exercise in cataloguing what had changed on the car since last season. But, could that no update path be about to change in Miami though?

Different is not always new

Alpine A525 nose and front wing comparison

This image showing two different nose and front wing configurations outside their garage ahead of the event might suggest so.

Hold your horses though, as whilst the nose and front wing assembly on the top of the stand outside their garage hasn’t been raced so far this season, it’s not actually new. It’s a design long thought abandoned from last season, when the team dropped the wider, longer nose assembly for its narrower sibling at the Qatar Grand Prix.

It would appear that Alpine have kept the old solution on hand though, as part of their spares package, using the nose and front wing when they’re pushing the car around in the pitlane and practicing pit stops etc, rather than risking damaging any of the new assemblies.

However, that’s not to say it might never see the car again, given that there’s no unilateral direction that teams have taken up and down the grid when it comes to the design of the nose and how it interacts with the central section of the wing.

To be clear, whilst the design of the nose is clearly different, those changes also have consequences when it comes to the shape and performance of the front wing too, with the static inboard sections beside the nose wider on the newer configuration, which also has a bearing on the width of the adjustable portion of the wing.

Consequently we can also see how this has an impact on the height and shape of the flaps, with a much deeper trailing edge section that tapers at either end on the older specification solution.

Let’s not forget that whilst the nomenclature has changed for 2025, this year’s chassis is the same as the A524, with the team opting to retain most of the hardware for this season, in order that they can deploy extra resources when designing next year’s challenger.

This has the added benefit of allowing the team to reuse items, such as this nose and front wing, without the need for major modifications.

Technical Image Gallery

A row of front wing and nose assemblies stacked up outside the Mercedes garage

A row of front wing and nose assemblies stacked up outside the Mercedes garage

Aston Martin AMR25 being prepared for action

Aston Martin AMR25 being prepared for action, note the outer brake drum fairing has not been installed, which shows how the air and heat can move between the nests within the drum assembly.

Ferrari SF-25 rear wing detail

Ferrari SF-25 rear wing detail, with the trailing edge trimmed back on the upper element, as introduced at the Saudi Arabian Grand Prix.

Racing Bulls VCARB02 being prepared for action

Racing Bulls VCARB02 being prepared for action, notably the front brake drum fairing has not been installed at this stage of the build, giving us a view of the fairings the envelope the brake disc and caliper.

Ferrari mechanics prepare the car for action

Ferrari mechanics prepare the car for action, note the bib damper is visible here, given the cover isn’t yet in place.

Mercedes mechanics prepare one of the W16's for action

Mercedes mechanics prepare one of the W16s for action and like the Ferrari image above, we’re treated to a view of their bib damper and the pipework and fairing for the brake caliper.

Top down overview of the Ferrari nose and front wing assembly

Top down overview of the Ferrari nose and front wing assembly.

Haas VF-25 detail

Peering into the Haas garage we’re greeted by the VF-25 in a state of undress.